{"id":3184,"date":"2015-06-20T15:25:44","date_gmt":"2015-06-20T22:25:44","guid":{"rendered":"http:\/\/kmwoley.com\/blog\/?p=3184"},"modified":"2015-11-13T08:05:28","modified_gmt":"2015-11-13T15:05:28","slug":"bypassing-needless-centurylink-wireless-router-on-gigabit-fiber","status":"publish","type":"post","link":"https:\/\/kmwoley.com\/blog\/bypassing-needless-centurylink-wireless-router-on-gigabit-fiber\/","title":{"rendered":"Bypassing needless CenturyLink Wireless Router on Gigabit Fiber"},"content":{"rendered":"<p><figure id=\"attachment_3185\" aria-describedby=\"caption-attachment-3185\" style=\"width: 640px\" class=\"wp-caption alignnone\"><a href=\"https:\/\/kmwoley.com\/blog\/bypassing-needless-centurylink-wireless-router-on-gigabit-fiber\/20150620_135246\/\" rel=\"attachment wp-att-3185\"><img loading=\"lazy\" decoding=\"async\" class=\"size-large wp-image-3185\" src=\"https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/20150620_135246-1024x768.jpg\" alt=\"What's missing? The CentryLink C2000T!\" width=\"640\" height=\"480\" srcset=\"https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/20150620_135246.jpg 1024w, https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/20150620_135246-300x225.jpg 300w, https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/20150620_135246-150x113.jpg 150w, https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/20150620_135246-400x300.jpg 400w\" sizes=\"auto, (max-width: 640px) 100vw, 640px\" \/><\/a><figcaption id=\"caption-attachment-3185\" class=\"wp-caption-text\"><strong>What&#8217;s missing? The CenturyLink C2000T!<\/strong> (Pictured: CenturyLink Optical Network Terminator (ONT) [left], CyberPower Battery UPS [center], Netgear Nighthawk R7000 [right])<\/figcaption><\/figure>My home recently got upgraded with CenturyLink&#8217;s gigabit fiber service, which is pretty damn great. As part of the installation, they run fiber optic cable into your home which terminates at a Optical Network Terminator (ONT), which is essentially a\u00a0Fiber-to-Ethernet modem. By default, CenturyLink will also install their own wireless router in your home because (a) most people need a wireless router and (b) they can make you pay $8\/month for the device (or $100 once to buy it from them).<\/p>\n<p>I&#8217;m interested in neither of those options, so I learned how to remove the needless extra device from the mix.\u00a0I&#8217;m happy with this setup because it saves me a watt or two of power at the wall plug, and it removes one more thing that could fail\/need to be rebooted.<\/p>\n<p>Here&#8217;s how I removed the CentryLink C2000T from my home networking setup&#8230;<\/p>\n<p><!--more--><\/p>\n<h1>Assumptions<\/h1>\n<ul>\n<li>You have working CenturyLink fiber optic networking with only internet. If you&#8217;re using their phone or TV services, you should <strong>not<\/strong> follow these instructions because you likely need the CenturyLink C2000T device for those other services.<\/li>\n<li>You have the following equipment installed and working:\n<ul>\n<li><a href=\"http:\/\/internethelp.centurylink.com\/internethelp\/modem-c2000t-gpon.html\">Technicolor\u00a0C2000T Modem (CenturyLink branded Wireless Router)<\/a><\/li>\n<li><a href=\"http:\/\/www.netgear.com\/home\/products\/networking\/wifi-routers\/R7000.aspx\">Netgear Nighthawk R7000 AC1900 Wireless Router<\/a><\/li>\n<li><a href=\"http:\/\/www.calix.com\/systems\/p-series\/calix_indoor_ONTs.html\">Calix 700GE-I Indoor ONT<\/a>\u00a0<em>(it\u00a0likely doesn&#8217;t matter what you have&#8230;)<\/em><\/li>\n<\/ul>\n<\/li>\n<li>These instructions probably work on other equipment with minor modification.\u00a0Give them a shot, but don&#8217;t blame me if they don&#8217;t work for you. :)<\/li>\n<\/ul>\n<h1>Part\u00a01: Transparent Bridging<\/h1>\n<p>The first step is to get the Netgear Nighthawk doing the internet login. If this step doesn&#8217;t work, you can&#8217;t remove the C2000T. This is done by putting the C2000T into Transparent Bridging mode and then setting up the Netgear router to do the login.<\/p>\n<p><strong>Step A:<\/strong><br \/>\nCall CentryLink and obtain your PPPoE login credentials. This is the username\/password that your router uses to log you onto their internet. The C2000T has this username\/password saved in it&#8217;s settings already, and you&#8217;re going to need this to get your Netgear router logged into the internet.<\/p>\n<p><strong>Step B:<\/strong><br \/>\nFollow <a href=\"http:\/\/internethelp.centurylink.com\/internethelp\/modem-c2000t-adv-bridging-q.html\">these instructions<\/a>\u00a0to set up Transparent Bridging on the C2000T. Basically you:<\/p>\n<ol>\n<li>Log into the C2000T (likely at http:\/\/192.168.0.1)<\/li>\n<li>Navigate\u00a0to\u00a0<span style=\"text-decoration: underline;\">Advanced Setup<\/span> &gt;\u00a0<span style=\"text-decoration: underline;\">WAN Settings<\/span><\/li>\n<li>Change &#8220;ISP Protocol&#8221; to &#8220;Transparent Bridging&#8221;<\/li>\n<li>Click &#8220;Apply&#8221;<\/li>\n<\/ol>\n<figure id=\"attachment_3187\" aria-describedby=\"caption-attachment-3187\" style=\"width: 640px\" class=\"wp-caption alignnone\"><a href=\"https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink1.png\" rel=\"attachment wp-att-3187\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-3187 size-large\" src=\"https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink1-1024x301.png\" alt=\"\" width=\"640\" height=\"188\" srcset=\"https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink1.png 1024w, https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink1-300x88.png 300w, https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink1-150x44.png 150w, https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink1-400x118.png 400w\" sizes=\"auto, (max-width: 640px) 100vw, 640px\" \/><\/a><figcaption id=\"caption-attachment-3187\" class=\"wp-caption-text\">Change &#8220;ISP Protocol&#8221; to &#8220;Transparent Bridging&#8221;<\/figcaption><\/figure>\n<p><strong>Step C:<br \/>\n<\/strong>Setup your Netgear Nighthawk to perform the internet PPPoE login:<\/p>\n<ol>\n<li>Login to your Netgear Nighthawk (likely at\u00a0http:\/\/www.routerlogin.net\/)<\/li>\n<li>Navigate to the\u00a0<span style=\"text-decoration: underline;\">Advanced<\/span> Tab &gt;\u00a0<span style=\"text-decoration: underline;\">Setup<\/span> &gt;\u00a0<span style=\"text-decoration: underline;\">Internet Setup<\/span><\/li>\n<li>Change &#8220;Does your internet setup require login?&#8221; to &#8220;Yes&#8221;<\/li>\n<li>Use the information from <strong>Step\u00a0A<\/strong> to fill in the &#8220;Login&#8221; and &#8220;Password&#8221;. All other settings can stay the same.<\/li>\n<li>Click &#8220;Apply&#8221;.<\/li>\n<\/ol>\n<figure id=\"attachment_3188\" aria-describedby=\"caption-attachment-3188\" style=\"width: 640px\" class=\"wp-caption alignnone\"><a href=\"https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink2.png\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-3188 size-large\" src=\"https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink2-1024x463.png\" alt=\"\" width=\"640\" height=\"289\" srcset=\"https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink2.png 1024w, https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink2-300x136.png 300w, https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink2-150x68.png 150w, https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink2-400x181.png 400w\" sizes=\"auto, (max-width: 640px) 100vw, 640px\" \/><\/a><figcaption id=\"caption-attachment-3188\" class=\"wp-caption-text\">Update your router&#8217;s login type and credentials.<\/figcaption><\/figure>\n<p>For good measure, you should probably turn everything off, wait a few seconds, and turn them on again. You should have working internet after everything reboots. If you don&#8217;t, don&#8217;t move on to the next step until you&#8217;ve resolved the issue.<\/p>\n<h1>Part 2: Removing the C2000T<\/h1>\n<p>The last thing you need to do before removing the C2000T is to set the VLAN settings on the Netgear Nighthawk. This is because CentryLink uses VLAN settings that aren&#8217;t the same as the default on the router. (This is where the Nighthawk is such a great device&#8230; most routers don&#8217;t have these settings available to users to adjust.)<\/p>\n<p><em>Tip: Make sure to upgrade the router&#8217;s firmware to the most recent software&#8230; the settings below are only available in the most recent updates.<\/em><\/p>\n<p><strong>Step A:<br \/>\n<\/strong><\/p>\n<ol>\n<li>Log back into your Netgear Nighthawk<\/li>\n<li>Navigate to the\u00a0<span style=\"text-decoration: underline;\">Advanced<\/span> Tab &gt; <span style=\"text-decoration: underline;\">Advanced Setup<\/span> &gt;\u00a0<span style=\"text-decoration: underline;\">VLAN \/ Bridge Settings<\/span><\/li>\n<li>Check the &#8220;Enable VLAN \/ Bridge Setup&#8221; box.<\/li>\n<li>Select &#8220;Enable VLAN Tag&#8221; if it&#8217;s not already selected.<\/li>\n<li>Select the radio button next to the &#8220;Internet&#8221; row in the table and click &#8220;Edit&#8221;<\/li>\n<li>Change the VLAN ID to &#8220;201&#8221; (it was probably set to &#8220;10&#8221;)<\/li>\n<li>Save the settings and &#8220;Apply&#8221;<\/li>\n<\/ol>\n<figure id=\"attachment_3190\" aria-describedby=\"caption-attachment-3190\" style=\"width: 640px\" class=\"wp-caption alignnone\"><a href=\"https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink4.png\"><img loading=\"lazy\" decoding=\"async\" class=\"wp-image-3190 size-large\" src=\"https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink4-1024x413.png\" alt=\"\" width=\"640\" height=\"258\" srcset=\"https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink4.png 1024w, https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink4-300x121.png 300w, https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink4-150x60.png 150w, https:\/\/kmwoley.com\/blog\/wp-content\/uploads\/2015\/06\/CenturyLink4-400x161.png 400w\" sizes=\"auto, (max-width: 640px) 100vw, 640px\" \/><\/a><figcaption id=\"caption-attachment-3190\" class=\"wp-caption-text\">Set the router&#8217;s VLAN configuration to match CenturyLink&#8217;s VLAN ID<\/figcaption><\/figure>\n<p>At this point, you probably just lost internet&#8230; but that&#8217;s okay&#8230;<\/p>\n<p><strong>Step B:<br \/>\n<\/strong>Finally, the last step is to disconnect the C2000T and wire the Netgear Router directly into the ONT.<\/p>\n<p><em><strong>IMPORTANT:\u00a0<\/strong>Make absolutely sure you plug the Netgear Nighthawk router into the same port as the C2000T was plugged into on the ONT. Only one port of your ONT is set up to work &#8211; no other port will do.<\/em><\/p>\n<h1>Conclusion<\/h1>\n<p>I hope that works for you. It took me a bit of searching to figure out how to do this, so I thought I&#8217;d pass this along. Some sources that were helpful to me:<\/p>\n<ul>\n<li style=\"margin: 0in; font-family: Calibri; font-size: 11.0pt;\"><a href=\"http:\/\/internethelp.centurylink.com\/internethelp\/modem-c2000t-adv-bridging-q.html\">http:\/\/internethelp.centurylink.com\/internethelp\/modem-c2000t-adv-bridging-q.html<\/a><\/li>\n<li style=\"margin: 0in; font-family: Calibri; font-size: 11.0pt;\"><a href=\"http:\/\/kb.netgear.com\/app\/answers\/detail\/a_id\/25724\/~\/vlan-tagging-setup-for-nighthawk-router\">http:\/\/kb.netgear.com\/app\/answers\/detail\/a_id\/25724\/~\/vlan-tagging-setup-for-nighthawk-router<\/a><\/li>\n<li style=\"margin: 0in; font-family: Calibri; font-size: 11.0pt;\"><a href=\"https:\/\/forum.pfsense.org\/index.php?PHPSESSID=00ktarsglfl0j7kgb9fnn426j5&amp;topic=92718.15\">https:\/\/forum.pfsense.org\/index.php?PHPSESSID=00ktarsglfl0j7kgb9fnn426j5&amp;topic=92718.15<\/a><\/li>\n<\/ul>\n<h1>Update 11\/13\/2015<\/h1>\n<ul>\n<li>Lots of folks have commented that they can&#8217;t get the full gigabit speeds with this configuration on the Nighthawk router.\n<ul>\n<li>450Mbps appears to be the max on the Netgear Firmware for the R7000.\n<ul>\n<li>I&#8217;m only paying for 40 Mbps up and 20 Mbps down, and I easily get those speeds with this configuration.<\/li>\n<\/ul>\n<\/li>\n<li>Richard (in the comments below) was able to get 900+Mbps up\/down using an <a href=\"http:\/\/www.amazon.com\/ASUS-RT-AC87R-Wireless-AC2400-Gigabit-Router\/dp\/B00MG3Q5U8\" target=\"_blank\">ASUS RT-AC87<\/a> router with the <a href=\"http:\/\/asuswrt.lostrealm.ca\/\" target=\"_blank\">ASUSWRT-MERLIN firmware<\/a>. \u00a0Although others have said they haven&#8217;t been able to repeat that success entirely. YMMV.<\/li>\n<li>Take a look through the comments to see how others have configured their networks to try.<\/li>\n<\/ul>\n<\/li>\n<li>Prism (TV) can be set up to work in this configuration. I don&#8217;t have Prism myself, but others in the comments have gotten to work\n<ul>\n<li>On\u00a0ASUS routers with these settings:\u00a0<a href=\"http:\/\/i.imgur.com\/vfBqOJj.png\" target=\"_blank\">http:\/\/i.imgur.com\/vfBqOJj.png <\/a>(thanks, Dylan!)<\/li>\n<li>On the R7000, by making sure <span style=\"text-decoration: underline;\">WAN Setup<\/span> &gt; <span style=\"text-decoration: underline;\">Disable IGMP proxying<\/span> is <b>not\u00a0<\/b>set. (thanks, Steven!)<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n","protected":false},"excerpt":{"rendered":"<p>My home recently got upgraded with CenturyLink&#8217;s gigabit fiber service, which is pretty damn great. As part of the installation, they run fiber optic cable into your home which terminates at a Optical Network Terminator (ONT), which is essentially a\u00a0Fiber-to-Ethernet modem. By default, CenturyLink will also install their own wireless router in your home because &hellip; <a href=\"https:\/\/kmwoley.com\/blog\/bypassing-needless-centurylink-wireless-router-on-gigabit-fiber\/\" class=\"more-link\">Continue reading <span class=\"screen-reader-text\">Bypassing needless CenturyLink Wireless Router on Gigabit Fiber<\/span><\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[5],"tags":[365,361,362,335,334,336,363,366,364,337,338],"class_list":["post-3184","post","type-post","status-publish","format-standard","hentry","category-geek","tag-ac1900","tag-asus-merlin","tag-asuswrt-merlin","tag-c2000t","tag-centurylink","tag-fiber","tag-netgear-nighthawk","tag-pppoe","tag-r7000","tag-transparent-bridging","tag-vlan"],"_links":{"self":[{"href":"https:\/\/kmwoley.com\/blog\/wp-json\/wp\/v2\/posts\/3184","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/kmwoley.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/kmwoley.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/kmwoley.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/kmwoley.com\/blog\/wp-json\/wp\/v2\/comments?post=3184"}],"version-history":[{"count":8,"href":"https:\/\/kmwoley.com\/blog\/wp-json\/wp\/v2\/posts\/3184\/revisions"}],"predecessor-version":[{"id":3283,"href":"https:\/\/kmwoley.com\/blog\/wp-json\/wp\/v2\/posts\/3184\/revisions\/3283"}],"wp:attachment":[{"href":"https:\/\/kmwoley.com\/blog\/wp-json\/wp\/v2\/media?parent=3184"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/kmwoley.com\/blog\/wp-json\/wp\/v2\/categories?post=3184"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/kmwoley.com\/blog\/wp-json\/wp\/v2\/tags?post=3184"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}